Posted September 13, 2018 16:20:33If you’re going to buy an aluminium folding tables, then you need to be able to fix the problem yourself.
If you can’t, you can get it repaired, but it will be expensive.
You can buy a replacement for the aluminium folding plate.
This is called a ‘spare’ aluminium plate, which means it has been used.
You can buy this for less than $20.
It may also be possible to get a replacement plate from a service centre, a hardware store or the factory.
Here’s how to get the aluminium plates you need:A small aluminium tray can be installed under the table.
The tray will be held in place by two screws.
These will be bolted onto the aluminium plate.
A small screwdriver will fit into the hole.
The screws should now be held into the aluminium tray.
This will ensure that the aluminium screws can be tightened down into the tray without damaging the aluminium.
The screws will now be secured by a rubber band.
This rubber band should be attached to the aluminium screw.
You should then be able go to the service centre and get a spare aluminium plate for around $20, or you can buy it at a hardware or service centre for about $25.