You might be asking yourself how to install the aluminum coil on your iPhone.
First, you’ll need to have an iPhone 7 Plus.
This is because, unlike other iPhones, you don’t need a special case to install it.
If you don, you might as well just buy a new iPhone.
The problem is, there are two different methods to do this.
The first method involves using an Apple adapter, but it doesn’t work on iPhone 7.
The second method involves drilling a hole into your iPhone’s back cover and then using a drill bit.
Here’s how to do it: 1.
Head over to the Apple Store and grab a drill.
If your iPhone doesn’t come with one, you can get one for $30 from Best Buy.
Insert a drill and drill into the back cover of your iPhone and then insert a metal object into the hole.
This could be a piece of aluminum, a metal screw, or even a plastic piece.
Insert the metal object and drill a small hole into the bottom of the hole that’s just slightly larger than the drill bit you used.
You should be able to get a good diameter.
Insert your drill bit and drill the hole in the back of your phone, using the same technique as before.
You can then insert the metal piece into the screw.
Now that you’ve drilled your hole, you should be left with two metal pieces that look like this.
Remove the screws from the back and replace them with the new metal pieces.
You’re now ready to install your aluminum coil.
First things first: First, install the iPhone 7 on the aluminum frame.
After you’ve done that, you’re going to need to install a special cover for your iPhone to fit inside.
This covers the display, the speaker, the microphone, and the battery.
You’ll also need a small slot in the frame to connect the battery to the back.
Connect the battery with the adapter you just bought.
This will connect it to the power jack.
If everything goes as planned, the cover should look something like this: